Höllein Inside F5J CNC Highend lasercut wooden kit

Item no.:  GRU2016 EAN:
Langsam für den Fotografen - INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 1
INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 2
Landeanflug hochalpin - INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 3
Landung auf 2500m (Fiss) - INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 4
Ein Foto von Josef Reischl - INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 5
Langsam für den Fotografen - INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 1INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 2Landeanflug hochalpin - INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 3Landung auf 2500m (Fiss) - INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 4Ein Foto von Josef Reischl - INSIDE F5J - low-priced starter model for F5J, 2866mm - Image 5
189,90
incl. VAT and excl. shipping
Total amount: {{ totalPrice }}
At the moment not possible to buy!
Purchase on bonus points:
You will need 189,90 bonus points for using bonus points for your purchase.
Additional bonus points needed: 189,90
This item notice Article is noted
Compare this article To the product comparison
Availability: (Delivery time: )
  • Description
  • Videos
  • Downloads
  • Reports/infos
  • Forum
  • Pressestimmen

INSIDE F5J - low-priced full house (6-flap) starter model for F5J
Top quality from Gruener-CNC. Made in Germany!

 
   The wings of  Inside F5J and Introduction F5J are exchangeable and available as kit!
 

Best novelty 2016 in the FMT readers' election

 

The model: 

15.09.2015: Our Introduction F5J, which is only a few months old, has broken all previous sales records of our own model lines! Now we want to satisfy all those customers, who think that the Introduction F5J is too "starter-like" or not agile enough.

Due to the resemblance between Introduction F5J and Inside F5J, the model descriptions resemble each other as well ...

Libelle Competition - Libelle Evo - Libelle Supreme - Libelle A 380 - Introduction F5J ... The new INSIDE F5J, our second model for the very attractive competition class F5J, has inherited excellent genes! Of course, it also is a plane for all kind of pilots: for those, who love long flights in the thermals as well as for those, who love to have relaxing flights, for the "come-without-charger-to-the-model-flying-site"-pilots as well as for the "I-won't-charge-between-the-flights"-pilots.

The differences to the Introduction F5J is the 6-flap-wing with ailerons with the associated reduced dihedral.

As usual we use stable tubular spars, precisely lasercut wood parts, a very simple construction (Hoellein-3D-puzzle), easy and forgiving take off-, flight- and landing characteristics, large speed range due to the profile AG35, ecxellent handling and thermal characteristics. In addition to all this, it is not only possible to program the "normal" flight mode, but also a thermal-and distance/speed flight mode. Easy purchase of single spare parts and assemblies. Made in Germany!

New: 2866mm wingspan, 1100g flying weight, three-part wing with multiple dihedral and attached wingtips, lightweight rudder and elevator constructed in a solid interlocking framework, removable elevator (optional) mounted in front of the rudder, 90° deflectable landing flaps enabling you flying vertical descents, integrated wing connectors in the main spar, innovative (tool- and tape-free) fixation of the outer wings. Vertical descents with deflected landing flaps (90°) and landings avoiding the vortex zone on steep slopes are now possible without any problems. Positive deflected flaps over the whole wingspan turn a very slow plane with the ability of flying tight circles into a plane that is even slower and circles even tighter. With negative deflected flaps your plane accelarates on it's way to the eagle on the other side of the model flying site without any problems. After switching to the thermal settings, the eagle will turn green with envy (see curve radius above)! With negative deflected flaps you either return to the take-off point or you head for the next upwind.

The recommended drive - containing the BL-outrunner Hacker A20-22L Evo, a 3-cell LiPo with a capacity of 1300mAh and the CamCarbon 11x6 prop - allows a many many climbs to thermal country. Due to the light weight, a motor run time of 5 to 10 seconds per climb is sufficient.


The kit:

Main feature of the model is the tubular carbon spar, onto which the lasercut ribs are kind of "threaded". Stylish wingtips ensure an elegant appearance. Our Introduction F5J  and Inside F5J have the most beautiful and elegant fuselage of all of our Gruener kits so far and it is consistently designed for the use of small brushless outrunners. With a flying weight of approx. 1100g and considering a wing with nearly 3 meters wingspan and a wing area of 65dm² (wing loading around 17g/dm²), you might imagine the thermal abilities of the Inside F5J. Due to the long fuselage and the multiple dihedral in combination with the wingtips, it has excellent flight characteristics.

The fuselage made of balsa is reinforced with light plywood in the front section. A precisely shaped milled part is already prepared to fix the motor Hacker A20-22L Evo. The kit contains, besides of the lasercut parts, CRP-spars, GRP-leading edges and all the small parts and linkages needed to complete the model. All the kits of the Gruener-CNC-line include a multicolored construction plan scaled 1:1 and a fully illustrated German construction manual.  

Glue, covering film, power- and RC-components are NOT included in the kit. As covering film we recommend ORACOVER or ORALIGHT iron-on film.

Recommended power drive:
  • Hacker A20 -22L Evo (premium suggestion) or Robbe Roxxy 2834/12 (standard, in this case the center hub 35.3,2.8 is obligatory) 
  • Flight controller Hacker X-40SB pro with integated BEC
  • 3S LiPo battery (from 850mAh, recommendation: 3S/1300mAh)
  • RE-spinner cone 35mm on center hub 35-3.0-8 (only for the Hacker-motor)
  • Aeronaut-folding prop CAM Carbon 11x6


Recommended RC-equipment:

  • Transmitter, able to manage a 6-flap-wing and several flight modes 
  • Receiver with normal range
  • 8 x servo Graupner DES 427BB, or as an alternative for "bumpy touchdowns": 6 x DES 427BB and 2 x DES 428BB MG (metal gear) 
  • Alternative: 8 x servo D-Power DS-140BB MG  

Recommended material for the wing's wiring:  
  • 8-pin "MPX"-socket and 8-pin "MPX"-plugs for the wing-fuselage-connection (required 1 x)
  • 5-pin "MPX"- flat socket and 5-pin "MPX"-flat plug for the connection of the outer wing pannels with center wing (required 2 x)
  • approx.. 3.2 meters servo cable 0.14 or 0.25mm²


Further information
 you find in the corresponding tab pages above this description.

Technische Daten
Hersteller/Importeur Grüner-CNC (Höllein) / MADE IN GERMANY
Bauweise Highest-Quality Holzbausatz, lasergeschnitten
RC-Funktionen Seite, Höhe, Quer, Flap, Endleisten-Landeklappen, Motorregelung
Spannweite ca. [mm] 2866
Länge ca. [mm] 1433
Tragflächeninhalt ca. [dm²] 65
Flächenbelastung ca. [g/dm²] 17
Fluggewicht ca. [g] 1100
Hoellein's choice of accessories: for this item:
manufacturer's choice of accessories: for this item:
following spare parts for this item:
following tuning parts for this item:
Average customer rating: 
Number of Customer reviews: 18
Write an online review of this item and show it to other visitors!
Item reviews
Das Modell überzeugt und bietet Raum für kleine Verbesserungen
Review from 09.08.2016|Purchase not verified
Ja, ich muss nicht alles wiederholen, was bisher geschrieben wurde. Ich war mit dem Modell auf der Tannenalm und es schlug sich wacker gegenüber den F5J Modellen in Voll-GFK bzw. CFK. Dieses Modell nimmt den Hauch einer Thermik an. Kein Wunder bei der geringen Flugmasse. Doch ein paar Verbesserungen wären wünschenswert. Als Motorspant hätte ich mir gern einen aus GFK gewünscht. Auch wenn die Motorschrauben fest angezogen sind, gibt das Holz auf Grund der Schwingungen nach. Die Motorglocke neigt dann zum Schleifen im Rumpf, was bei mir zu einem "riechenden Motor" und einem lädierten Regler führte. Ich habe deshalb einen gekapselten Aussenläufer von Staufenbiel (Dymond X-MAX X28-L) eingebaut. Zweiter Hinweis. Die Anschlussrippe beim Aussenflügel ist zu dünn. Setzt der Flügel mal unsanft auf, so bricht das dünne Sperrholz weg und die Sicherung fällt heraus. Nun noch zum Magnetverschluss, der seine Funktion erfüllt, wenn die Magnete genau gegenüber verklebt (das ist Millimeterarbeit!) sind. Bei mir reichte der Luftschraubenstrahl, um die Rumpfklappe anzuheben. Mit einer Drahtkonstruktion (ich muss mal ein Bild machen; wie stellt man das hier ein?) geht es viel einfacher. Ein Lob zum Schluß - die Sicherung des Aussenflügel ist genial! Alles in allem ist das Modell preiswert und gelungen. Das Bauen macht Spaß, da die Teile passgenau gearbeitet sind. Also etwas für Holzwürmer, die noch gern bauen.
12 of customers found this information helpful.
Nostalgie der Moderne
Review from 19.05.2019|Purchase not verified
Den Bausatz hab ich. Dann kamen Überlegungen, mir die Arbeit doch nicht anzutun. Danach Ideen, den Vogel marginal zu vergrößern, denn der Rumpf ist lang genug - etwa 3-3.5m Spannweite. Und noch etwas: ich bin VLW-Fan (nein, nicht VfB). Einige Änderungen, aber es reizt mich.

Da man Einzelbereiche des Baugefüges nachkaufen kann, die Gelegenheit. Das VLW einfach selbst entwerfen und bauen - kein Problem, alles flache Brettchen. Die TF mit Hilfe nachgekauft fertiger Rippen marginal zu strecken - auch keines. Mehr Arbeit, sonst nichts. Ein bißchen Gefummel mit dem Bauplan, doch mit durchpausen und dran flicken geht auch das.

Anfangs hatte mich die Umstellung auf meine neue Funke, eine mz-24Pro, abgelöscht. Ich wollte keinen Computer fliegen, sondern ein gutes Modell. Heute komme ich damit schon besser zurecht.

Fliege zZt den Pegasus-V von TopmodelCZ - gut. Doch mir fehlt ein Thermikschnüffler mit mehr Spannweite - und da erinnerte ich mich an den Inside F5J. Zuerst den TripleThermic, dann den? Mal sehen, die Teile kann ich aber schon mal ordern.

Einen Punkt kann ich den Kollegen bestätigen: wer kann, sollte das Modell mit einem leichten Getriebe-Innenläufer ausrüsten. Klarer Vorteil: daran kann nichts kaputtgeschliffen werden. Will ich auch berücksichtigen.

In einen derart edlen, richtig guten Vogel kommen bei mir nur 1a Servos, Regler, BL und Akkus.

Es ist seltsam und schön zugleich: allein der Anblick des Bausatzes und Fotos/Videos vom Modell erinnern mich an meine Anfangszeit im Modellbau und -flug, viele viele Jahre her. Dass es das heute wieder und moderner, komfortabler gibt, können wir gar nicht hoch genug schätzen.
2 of customers found this information helpful.
Schon das Bauen: Einfach nur Spaß!
Review from 16.01.2024|Purchase not verified
Jungfernflug steht noch aus, aber bis jetzt steht für mich fest: besser kann man einen Bausatz + Bauanleitung + Stückliste nicht machen.
Alles passt auf 1/10 genau, alles Erforderliche ist dabei - ein bisschen eng, aber ich werde wohl ohne Blei auskommen.

Unbedingt empfehlenswert, wenn man (Modellbaukenntnisse vorausgesetzt) einen einfach zu bauenden Leistungssegler möchte.
1 of customers found this information helpful.
View all reviews