PCB for MPX high voltage plugs, # HA 86010
Adapter PCB, which allows the direct soldering of MPX connectors. The cables (e.g. the servo cables) can simply be soldered onto the large soldering pads.
A suitable shrinking tube is sufficient for insulation (item no. A84025), perfect for supplying servos at wing connections.
In connection with the MPX-housings contained in the MPX-sets (item no. A85020 or A85021) there is no glueing necessary, because when soldering the PCB the high voltage plugs are fixed in the housing.
All 6 cables are led to 8 soldering pads, so that it is easily possible to solder the servo cables onto the upper and lower side of the PCB. This PCB has a thickness of 1.6mm, thus suitable for the MPX connectors.
Scope of delivery
- Version 4 pins without connector: 5 pieces
- Version 6 pins without connector: 5 pieces
- Version 6 pins with connector/accessories: 2 MPX sockets, 2 MPX plugs, 4 6-pin-PCB, 4 cable ties and 4 shrinking tubes.
- Version 6 pins soldered with connector: 2 MPX sockets and MPX plugs with soldered 6 pin PCBs each, 4 cable ties and 4 shrinking tubes.
The PCBs should be soldered to the plugs and sockets when they are connected.