Aeronaut Triple R.E.S.

Triple R.E.S., wingspan 1990mm
Aeronaut # 112801

 „Triple R.E.S.“ has a wingspan of 199 cm and a more pronounced dihedral than "Triple thermic". Radio control is rudder, elevator and spoilers only as required by RES regulations. 

The sleek glider fuselage offers very good aerodynamic characteristics. The fuselage for E-power has a wider nose to accept a 28-mm-outrunner and offers room for a 3s-LiPo with a capacity of 2.500 mAh. Both versions have a removable canopy secured by magnets and a removable cover on the belly of the fuselage, which gives access to the V-tail servos. 

All three versions of the Triple are all-wood designs, putting an emphasis on model building which has a long tradition at aero-naut. The fuselage is built up of balsa and light-ply, a well thought-out concept ensures a rapid building process and makes mistakes almost impossible. The V-tail consists of precisely laser-cut parts and uses a special jig for good results. The wings use conventional ribs and spars and just require a flat building board for construction. The trailing edges are built-up components and combine low weight with good strength. Even those who want to give model building a try will succeed with Triple and can build their own individual glider or electric glider in a short period of time. Flying characteristics are excellent and make sure that even beginners or less experienced pilots will have fun. Clubs will find this model even an attractive project for younger members, who still learn how to build and fly.

This completely new developed model concept offers a stylish fuselage with V-tail (either as glider or electric powered glider - both versions are included in the kit) and three different wingspans.   
Dieses völlig neu entwickelte Modellkonzept bietet einen formschönen Rumpf mit V-Leitwerk (wahlweise als Segler oder Elektrosegler aufzubauen – beide Versionen sind im Baukasten enthalten) und drei verschiedene Spannweiten. All wings can be mounted on the fuselage - without any tools, but with a strong magnetic lock. So a quick change is possible, even on the airfield. 

The kit contains:

The kit includes all laser-cut wood parts required to build the model, spruce spars, control linkage parts and snakes, small parts bag.
Detailed building instructions with step-by-step graphics and text will answer all your questions.

Suitable components for electric version:

• Motor from approx. 150 Watt
• Battery 3s Lipo to approx. 2500 mAh
• Controller approx. 20A
• CAMcarbon folding prop 9x5“-12x7“ depending on choice of motor!
• CoolNose-Spinner Ø 30 mm incl. center hub

Further information you can find in the corresponding tab pages above this description.