- Description
Foxx, electric pylon model, wingspan 900mm
Aeronaut # 135100
A high top speed is the ultimate attraction for many RC-pilots. Low all-up weight and brushless power combine for a performance that seemed impossible only a few years ago. The FOXX is a powerful speeder with exceptional flight characteristics.
The lightweight yet strong construction is almost entirely balsa and promises loads of fun for the pilot. Due to the model's high flying speed the FOXX is recommended for experienced pilots only. The model uses lasercut parts (mostly balsa) for construction, as well as spruce spars and light-ply formers. A 3-channel radio is required to control ailerons, elevator and ESC.
For power we recommend inrunners with 2500 kV or higher and a diameter of 28mm. The construction of the model is simple and straightforward, employing the techniques used in most modern aeronaut models, and can be completed within a busy weekend.
The kit contains:
-
All wooden parts required to build the model
-
Small parts bag with control linkage and wing mounting parts
-
Detailed 3D building instructions with graphics and text
Recommended components:
-
Motor - inrunner with Ø28mm and 2500 - 2700 U/Volt
-
Controller - approx. 60A
-
Battery - 3S LiPo, 2000 - 2500mAh
-
Spinner - 38 mm
Further information you find in the corresponding tab pages above this description
Technical data | |
Manufacturer/Importer | Aeronaut |
Type of construction | Bausatz aus Holzteilen |
Wingspan approx. [mm] | 900 |
Length approx. [mm] | 645 |
Wing area approx. [dm²] | 12 |
Take-off weight approx. [g] | 600 |
RC functions | Höhe, Quer, Motorregelung |