F4U Corsair, wingspan 1430mm, PNP
D-Power # FMS024PBLU
The F4U-4 Corsair from FMS is a very detailed Scale Warbird with a wingspan of 1430mm.
The combination of the powerful brushless drive, the 70A brushless controller and a 4S battery (sold separately) will not only catapult the model, but also your adrenaline in lofty heights.
This model airplane is made of EPO hard foam and is delivered with pre-installed electronics and ready to fly.
Motor, controller, servos for ailerons, rudder and elevator, landing flaps and the retractable gear are already installed.
You only need a suitable battery and a remote control system.
Due to the solid EPO hard foam construction the F4U Corsair forgives some hard landings. If foam parts are damaged, they can be quickly and durably repaired with superglue.
For the construction of the model plane there is no glue needed. Electronics and undercarriage are already pre-installed, you only have to screw the wings and tail unit.
PNP-model made of solid EPO hard foam
Powerful brushless outrunner, high performance controller and servos with metal gear already pre-installed
Ready to fly after just a few steps
Lots of Scale details
Solid electronical retractable gear
Functional landing flaps
Includes 4-blade propeller 14x8“
Illustrated construction manual is included
Finished model with pre-installed components
Motor: Brushless 4250-KV540
Controller: Brushless 70A with 5A BEC
Servos: 2x 9g MG and 6x 17g MG
Remote control: at least 6 channels
Receiver: at least 6 channels
Battery: 4S LiPo 2600mAh 25C
Further information you find in the corresponding tab pages above this description
|Type of construction||Fertigmodell aus EPO|
|Wingspan approx. [mm]||1430|
|Length approx. [mm]||1240|
|Take-off weight approx. [g]||2440|
|RC functions||Seite, Höhe, Quer, Motorregelung, Landeklappen, Einziehfahrwerk|