Piper PA-18 Super Cub, PNP, wingspan 1700mm
D-Power # FMS110P
In the air at „3“
The Piper PA-18 Super Cub is a two-seat single-engine monoplane, which was developed on the basis of the Piper PA-11. Within the 40 years of production more than 9.000 units had been built.
Super Cubs are often used for bush flying, towing banners or as tug planes.
As well as the Piper PA-11, the PA-18 Super Cub from FMS has excellent STOL (short takeoff and landing) characteristics. The model can be in the air after less than 3 meters!
Due to the functional flaps and the wings' profile the Super Cub can be flown very slow and scale-like.
With it's oversized balloon wheels and the spring mounted metal chassis, takeoffs and landings are even possible on grass covered runways and uneven and rough terrain.
Ready for takeoff in a few minutes:
Due to the bolted construction the PA-18 Super Cub is ready to takeoff in a very short time. The drive and six 17g servos are already mounted and all linkages are pre-installed. In addition to this, the plane is equipped with navigation- and landing lights.
The Super Cub is powered by a 4S LiPo in combination with a powerful 35er brushless outrunner with 750KV. The drive is controlled by a Predator 45A flight controller.
With the recommended 4S 2200 to 2600mAh-batteries recommended by D-Power, flight times of 4 to 5 minutes are possible.
Die PA-18 Super Cub from FMS is already equipped with navigation- and landing lights. Especially in the twilight the model plane looks just like the original and is an absolute eye-catcher.
3. 2. 1… Yours?
The PA-18 Super Cub is perfect for all pilots, who desire a versatile and relaxing flying model aeroplane.
Lightweight, hard density foam construction of solid EPO material
Mounted landing- and navigation lights
STOL-able (takeoff in less than 3 meters)
Solid spring mounted metal chassis with oversized 6,5“ balloon tires
Powerful 3541-KV750 brushless-motor with Predator 45A flight controller
Six 17g servos with metal gear
Pre-installed ball beared rudderhorns
Servo plugs are integrated in the wings
Including 12x7,5“ 2-blade propeller, all linkages and small parts
Big battery compartment
Decor already painted
Illustrated instruction manual in German and English
Transmitter and receiver with at least 6 channels
4S 2200 - 2600mAh LiPo batteries
Further information you find in the corresponding tab pages above this description
|Type of construction||Fertigmodell aus Schaum|
|Wingspan approx. [mm]||1700|
|Length approx. [mm]||1136|
|Wing area approx. [dm²]||42|
|Take-off weight approx. [g]||2100|
|RC functions||Seite, Höhe, Quer, Motorregelung. Landeklappen|