Sopwith Pup - wooden kit from Gruener-CNC

Item no.:  GRU1900 EAN:
Motorattrappe optional! - Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 1
Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 2
Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 3
Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 4
Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 5
Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 6
Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 7
Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 8
Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 9
Motorattrappe optional! - Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 1Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 2Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 3Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 4Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 5Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 6Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 7Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 8Sopwith Pup, CNC-biplane kit from Gruener-CNC - Image 9
134,90
incl. VAT and excl. shipping
Total amount: {{ totalPrice }}
At the moment not possible to buy!
This item notice Article is noted
Compare this article To the product comparison
Availability: (Delivery time: )
  • Description
  • Documents

Sopwith Pup, highest-quality wooden kit from Gruener-CNC The classic from 1916 in ultramodern manufacturing!

 
The original:
The Sopwith Pup had been a British single-seater biplane, which was used as a fighter in the First World War. The Pup was built from the Sopwith Aviation Company and originated from the personal plane of the Sopwith chief pilot.

The Sopwith Pup was a very agile fighter, very pleasant and easy to fly.  Due to the big wings it had a good rate of climb and maneuverability, especially in high altitudes. According to James McCudden, it was flying two circles, while at the same time Albatros was flying only one - although the Sopwith Pup had a weak drive compared to the Albatros D.III. Manfred von Richthofen praised the agility of the Sopwith Pup, but criticized the lack of nosedive abilities. Altogether 1770 Sopwith Pups were built.


The model:
After our 1:10 semiscale-models Piperle and Tiger Moth being successful and world-famous for years now, it was time for Ralf Gruener (Gruener-CNC) to set a new "benchmark" with the Sopwith Pup concerning manufacturing quality, fit accuracy, construction manual and construction plan. Be amazed by our new Sopewith-kit. All wooden parts are precisely cut, BYO-wheels, a detailed, illustrated multicolored manual with rudder deflection, multicolored construction plan, parts list, laser-numbered parts - whatever we wanted: all of it had been realized by Gruener in the construction of the Sopwith Pup. And "the icing on the cake" is the optional dummy of 9-cylinder radial engine made of 225 (!) lasercut single parts. Do we love details? YES, we do!
 
Important: the construction of this model is not completed "within a couple of evenings"! Above all, this model is for all those, who enjoy building and creating on their own and who are not satisfied with building and creating Climaxx or the Big Easy. "You have already finished with it within 3 evenings" (original quote of a customer).
 
 
Scope of delivery: 
  • Wooden kit containing CNC-lasercut parts made of balsa and plywood
  • BYO-wheels made of lasercut parts
  • Complete set of small parts and linkages
  • Carbon fibre rod
  • Steel wire in different thicknesses
  • Multicolored plan, parts list
  • Detailed, fully illustrated, multicolored manual including rudder deflections

Optionally available accessories:

  • Dummy of 9-cylinder radial engine made of 225 (!) lasercut single parts
  • Decal set made of plotted Orastick self-adhesive film

 

Additional needed equipment:

  • BL-motor Roxxy 3530/14
  • Lipo battery 3S/1300mAh
  • Prop APC-E 11.0x5.5
  • 4 x servo DES 427 BB
  • BL-controller Roxxy 930/6
  • ORALIGHT iron-on film of your choice
  • Receiver of your choice
SH 06.05.13

Further information you find in the corresponding tab pages above this description.

Technische Daten
Hersteller/Importeur Grüner CNC/made in Germany
Bauweise CNC-Holzbauweise aus lasergeschnittenen Bauteilen
Maßstab 1:10
RC-Funktionen Seite/Höhe/Quer/Motorregelung
Spannweite ca. [mm] 914
Länge ca. [mm] 670
Tragflächeninhalt ca. [dm²] 31
Flächenbelastung ca. [g/dm²] 22
Fluggewicht ca. [g] 700
Hoellein's choice of accessories: for this item:
manufacturer's choice of accessories: for this item:
optional parts for this item:
Average customer rating: 
Number of Customer reviews: 6
Write an online review of this item and show it to other visitors!
Item reviews
Super Bausatz
Review from 27.07.2016|Purchase not verified
Vorweg: Dokumentation 1A Material 1A Dieser Bausatz ist das Beste was ich bis jetzt gesehen hab. Sauer geschnittene Teile die ohne nachbearbeitung passen. Der Bausatz ist zwar nicht unbedingt für Anfänger, ist aber das obere Ende der Messlatte. Man kann nur hoffen das da noch mehr Modelle kommen.
6 of customers found this information helpful.
Ein Traum!
Review from 20.05.2017|Purchase not verified
Die Pup war mein erstes Balsa Modell nach einigen Schaumwaffeln und sie hat mich direkt überzeugt. Der Bau ist wie angegeben zwar Zeitaufwendig, aber dank der guten Anleitung und der perfekt passenden Teile ist es auch für einen Neuling kein Problem und macht Spaß.
Die Flugeigenschaften sind ebenfalls grandios, dank des geringen Gewichtes kann sie sehr langsam fliegen und mit dem Vorgeschlagenem Antrieb(welcher sehr leise ist) und einem 1300mah Akku kommt man bei etwas weniger als Halbgas auf bis zu 30min Flugzeit! Wenn man "normal" fliegt kann man mit ~15min rechnen. Es sind aber auch genügend Leistungsreserven vorhanden um sie aus allen Situationen zu retten oder auch mal etwas sportlicher zu Fliegen. Zwei harte Abstürze, bei denen meine Schaumwaffeln vermutlich gebrochen wären, hat sie ohne ernste Schäden überstanden.
Eine Luftschraube aus Holz würde ich jedem empfehlen, sie gibt der Pup optisch den letzten Schliff.
Sie ist definitv das beste Modelll das ich jemals hatte und ich kann sie nur jedem empfehlen.
2 of customers found this information helpful.
Schicker Baukasten
Review from 20.01.2024|Purchase not verified
Bausatz ist soweit super gefertigt,macht auch in 2024 Spass zu Bauen.
Bis jetzt steht der Rohbau,bin schon auf die Flugeigenschaften gespannt habe da aber noch nichts negatives gehört...
0 of customers found this information helpful.
View all reviews