ASK-21, semi-scale glider, wingspan 3200mm
D-Power # GL06
The ASK-21 from the well-known manufacturer Phoenix Model is a beautiful scale glider. The 1/5-scale glider ASK-21 with a wingspan of 3.2m is equipped with lots of scale details and features.
In the cockpit there is a pilot and there you find plenty of circular instruments. Furthermore the glider is already equipped with a tow release.
Optional 440 mm airbrakes can be installed in the two-part wing. This enables the glider to land even on narrow landing strips.
The glider version can also be converted to an electric glider. All necessary parts for the mount of the electric motor are included in the scope of delivery.
The ASK-21 is a high-quality wooden construction and covered with the original Oracover film. All required small accessory parts for the construction are included in the kit.
Covered with original Oracover foil
Extremely lightweight and solid lasercut wooden construction
Level of prefabrication 95%
Readily covered and painted
Already prepared for the mounting of 440 mm airbrakes
RC functions and recommended servos (NOT included in the kit):
Aileron: 2x D-Power AS-340BBMG
Elevator: 1x D-Power AS-225BBMG
Rudder: 1x D-Power AS-225BBMG
Tow release: 1x D-Power DS-590BBMG LP Servo (only glider version)
Drive recommendation ASK-21 (NOT included in the kit):
Brushless motor Set: BL-motor AL35-08 and controller 60A
Battery: D-Power HD-5000/3S 11,1V Lipo
Further information you find in the corresponding tab pages above this description
|Bauweise||Fertigmodell in klassischer Holzbauweise|
|Spannweite ca. [mm]||3200|
|Länge ca. [mm]||1650|
|Fluggewicht ca. [g]||3200|