Slope Infusion, Grüner-CNC kit with ailerons

Item no.:  GRU2002 EAN:
SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 1
SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 2
SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 3
SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 4
SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 5
SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 1SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 2SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 3SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 4SLOPE INFUSION, Grüner-CNC kit, 1950mm, with flaps and ailerons - Image 5
169,00
incl. VAT and excl. shipping
Total amount: {{ totalPrice }}
At the moment not possible to buy!
This item notice Article is noted
Compare this article To the product comparison
Availability: (Delivery time: )
  • Description
  • Downloads
  • Videos
  • Forum
  • Documents
 

SLOPE INFUSION - Highend lasercut wooden kit
Top quality from Grüner-CNC. Proudly made in Germany!
 
1950mm with ailerons and flaps

To all, who already have a model from Gruener-CNC: Order and enjoy ... we won't disappoint you!

An agile slope glider at the Heavenly - how come?

The model:

SLOPE INFUSION
- goes straight into your veins! It was about time for something new from GRUENER-CNC. You already have the Introduction F5J and the Inside F5J (our powerful and relaxing "cloudstickers"), and you already have the Innovation as well. We now  have a new stimulation for your bloodstream!  

With a wingspan of about 2m, 3-piece wing and 4 wing servos our  SLOPE INFUSION is an agile "always-in-the-pocket" model with a wide range of applications. Easy and forgiving take-off-, flight- and landing characteristics, a wide speed range due to the cambered profile of the entire wing. By using the deflectable flaps and ailerons the slope glider design with the profile "Selig 7012" can be transformed into a lamblike glider with a convincing and, for the design, surprising thermal performance. Due to the "Butterfly"-landing configuration vertical descents from great heights with a minimum space requirement for landing are possible. The powerful motorisation makes you independent of the flying site and allows a larger radius of action and "riskier" thermal tracking on slopes. The recommended propulsion - consisting of the BL outrunner Hacker A20-12XL, a 3-cell LiPo with 1300mAh capacity and the CamCarbon 10x6 - allows lots of climbs to thermally amazing heights and spectacular "rescue operations", if the lift on the slope is not as good as expected. Due to the light flight weight, 10s of engine run time per climb are absolutely sufficient. For the glider and slope purists among you we offer a separately available glider conversion kit. The SLOPE INFUSION is not recommended for beginners because of the fast climb and the good rudder efficiency. For all the advanced pilots: Get it, enjoy the good quality of the kit, build it with enthusiasm, and have heavenly flights wherever you are! (Pack dimensions fuselage: 111cm, pack dimensions wings: 91cm!).

The kit:

Typical for GRUENER: Solid tubular spar construction with pullwinding spars. Compared to pultruded tubes these have a much higher bending and torsional strength. Precisely lasercut wooden construction, simplest construction (Höllein-3D-puzzle). Easy procurement of single parts and assemblies. Proudly made in Germany!
3-piece wing, planked flat-built tailplane, removable elevator in front of the rudder (optional), 90° deflectable landing flaps (bottom mounted), integrated wing connectors in the main spar, innovative (tool- and tape-free) fixation of the outer wings. Main feature of the model is the tubular carbon spar, onto which the lasercut ribs are kind of "threaded". Half-ribs in the front section of the wing ensure good airfoil accuracy and prevent the covering film from collapsing in this section of the profile. Stylish wingtips ensure an elegant appearance. The fuselage is consistently designed for the use of small brushless outrunners. Nearly 2m of wingspan, an all up weight of around 900 grs, a wing area of 32dm² makes a wing loading of 28g/dm².        

The fuselage (built from balsa, reinforced by "clicked in" plywood formers) is doubled-up by lightweight plywood underneath the wing. The milled bulkhead is already prepared for the mounting of a Hacker A20-12XL. The kit includes - besides lasercut parts - the GRP tube spars, GRP leading edges and all linkages and small parts. A multi-coloured construction plan (Scale 1:1) and widely illustrated German building instructions are of course included when you buy a kit from our GRUENER-CNC line. The kit doesn't include any glues, covering material, power drive, batteries and RC components. As covering we recommend ORACOVER(Ultracote) covering film.

 
 

Recommended accessories:

  • Brushless motor: Hacker A20-12XL, #H97800010
  • Controller: FlyFun 40A, #ROHW30214002       
  • Center yoke: Reisenauer system, #RE-K35.3,2.8       
  • Spinner cone: Reisenauer system, #RE-35       
  • Airscrew (folding): PSK Carbon Folding 10x6, #PSK-1031.10x6
  • LiPo battery: LiPo 3S/1300mAh,11.1V
  • Servos 4 pcs. D-Power DS140, #DPDS140
  • Servos 2 pcs. KST DS 113, #KSTDS113MG
  • Female cable: #MU59226 (2 pcs.), (join center part/outer wings)
  • MPX green connector pair (#HOEMPX) (join wing/fuselage)
  • Male servo cable: #MU59125 (4 pcs.) (join MPX green/receiver)
  • Wing covering material: 2.0 meters preferably ORACOVER/ULTRACOTE
  • Fuselage covering material: 1.1 meters, preferably ORACOVER/ULTRACOTE
  • Glues of your choice
Technische Daten
Hersteller/Importeur Grüner CNC
Bauweise CNC-Laser Holzbausatz
RC-Funktionen Höhe/Seite/Motor/Wölbklappen/Querruder
Spannweite ca. [mm] 1950
Länge ca. [mm] 1110
Tragflächeninhalt ca. [dm²] 30
Flächenbelastung ca. [g/dm²] 30
Fluggewicht ca. [g] 900
Hoellein's choice of accessories: for this item:
optional parts for this item:
following spare parts for this item:
Average customer rating: 
Number of Customer reviews: 12
Write an online review of this item and show it to other visitors!
Item reviews
Ein sehr gelungenes Modell
Review from 27.07.2020|Purchase not verified
Nachdem ich den Slope Infusion jetzt gebaut und geflogen habe möchte ich hier ein positives Feedback hinterlassen.
Normalerweise gehöre ich nicht zu denen die ihre Meinung überall posten müssen, aber das Modell hat mich wirklich begeistert.
Schon die Auslegung mit der dreigeteilten Fläche und dem abnehmbare Leitwerk ist rundum gelungen.
Der Bausatz ist von hoher Qualität und lässt sich sehr schön Bauen. Das Bügeln der filigranen Fläche ist allerdings nicht so einfach, da braucht’s schon ein bisschen Übung.
Im Flug ist das Modell gut beherrschbar und reagiert direkt auf die Ruder. Die Einstellungen aus der Bauanleitung kann ohne Bedenken übernommen werden.
Unterm Strich ein toller Flieger!
12 of customers found this information helpful.
Eierlegende Wollmilchsau !
Review from 23.12.2020|Purchase not verified
Nachdem ich aus der Grüner Baureihe schon Inside F5j, Introduction und Innovation gebaut und geflogen hatte, war ich gespannt auf das neueste Projekt aus der Schmiede.
Ich denke zur Bausatzqualität der Grüner-Produkte muss man nicht mehr viel sagen - das ist absolute Referenzklasse.
Zusammenstecken und verkleben. Das ist fast wie LEGO. Man kann eigentlich nur einen Fehler machen, und das ist zu glauben, man sollte irgendwelche Teile nachschleifen oder anpassen. Hervorragend diese Präzision der Lasercutteile.
Nun zum Fliegen: mit diesem Modell geht alles. Rasante Steigflüge, entspanntes Fliegen und Kreisen in der Thermik, sowie Kunstflug und jegliches Rumturnen (für das niedrige Gewicht überraschend guter Durchzug). Bei alldem bleibt der Slope absolut gutmütig und lässt sich stressfrei langsam landen. Die empfohlenen Einstellwerte habe ich übrigens alle übernommen und auch nicht mehr verändert.
Ich warte schon auf das nächste Grüner-Modell und könnte mir gut einen auf ca. 3m vergrößerten Slope Infusion vorstellen.
3 of customers found this information helpful.
ein geniales Fliegerle
Review from 10.08.2022|Purchase not verified
Der Bau ging schnell und ohne Probleme von statten. Es gibt in der Anleitung keinerlei Stolpersteine ! Dennoch sollte man die Anleitung einmal komplett vor Beginn durchlesen.

Die Flugeigenschaften sind tadellos, in der Thermik kreisen und bei erreichen der Sichtgrenze 10 Sekunden Tiefe drücken und mit Loopings und Rollen die Höhe abbbauen - großartig !! aber nicht übermütig werden es ist trotz aller Qualität ein Holzfliegerle...

Rundum ein sehr gelungener Bausatz den ich absolut empfehlen kann !
1 of customers found this information helpful.
View all reviews