|Quantity||Price||incl. VAT and excl. shipping|
Libelle Evo V2, glider version
CNC-kit "made in Germany"
Our Libelle Evo V2. The advancement of a legend!
April 1993(!): Original Libelle from Egon Löser, manufactured by Löser CNC in Germany
April 2002: Libelle EVO, revised and manufactured by HAUCK models in Germany
September 2003: Libelle EVO, revised and manufactured by Gruener CNC in Germany
Ende 2013: Libelle EVO V2, revised and manufactured by Gruener CNC in Germany
After 20 years and several thousand "made in Germany/highest quality kits" sold, we "tuned" the Libelle. It kept it's brilliant flight characteristics, the easy handling, the outstanding lightweight and solid construction with pine spars and shear webbing. What is NEW? New is the balsa sheeting (up to the main spar) and spoilers as standard with an innovative linkage. Due to that, the required landing area can even be smaller than before. Spot landings in contests are possible without any problems. The light weight of the Libelle EVO V2, the high mechanical solidity due to the partly sheeted wings and, last but not least, the spoilers as standard, make the V2 very interesting for R.E.S. competitions. Therefore we didn't have to change a lot in the description (basically since 1993, a lot of you are surely familiar with it and know it from our printed catalogue - the "Hoellein-bible").
Of course MADE IN GERMANY - as usual! You take the lasered ribs, push the root rib into a fuselage side...or the main spar into a precisely lasered* recess of the ribs … or the lasercut rudder into the intended fit of the lasercut elevator … and you will share our enthusiasm for the first model of our (at the time) CNC-manufactured model-line (original Libelle since 1993!). In April of 2002 the manufacturing of our LIBELLE EVO at LÖSER-CNC was taken over by GRÜNER CNC service (those with the CLIMAXX, THERMAL INSTINCT, SOPWITH PUB ...). The construction had been modified carefully (we don't want to impair anything in the end) and optimized. The rudder and the elevator form an interlocking framework with the fuselage, so that construction errors are excluded. The wings consist of shear webbed pine spars, which preset the dihedral. A device for the vertical alignment of the ribs is included.. The frames are now interlocked with the fuselage sides. The new construction plan (now multicolored in the top quality of GRUENER, as usual) and the new, detailed, fully illustrated manual with perspective drawings make the previous equipment complete.
LIBELLE EVO V2 - lasercut in perfection! The kit contains all needed wooden parts (most of them are lasered), rudder horns made of lasercut plywood and a complete set of small parts and linkages. Also included: a multicolored printed CAD-plan 1:1! Glue and iron-on covering film (we recommend ORACOVER) are NOT included in the kit. The RC-equipment for our LIBELLE consists of 2 servos Graupner C 261 for elevator and rudder, 2 4.4g-servos for the linkage of the spoiler and a square 800 Eneloop receiver battery. Our test models are equipped with Futaba-receivers. There is enough room for all the other 2.4GHz-receivers as well.
Wooden kit containing CNC-lasercut parts made of balsa- and plywood
Complete set of small parts and linkages needed
Multicolored plan, parts list
Detailed, fully illustrated manual including rudder deflections and advices for covering
Additional needed equipment:
2 x servo Graupner/JR C 261 or similar
2 x servo Robbe 4.4g or similar
Receiver battery square ENELOOP 4/800
- Receiver of your choice
ORACOVER iron-on film of your choice
Further information you find in the corresponding tab pages above this description.
|Manufacturer/Importer||Grüner CNC, Deutschland|
|Type of construction||Highest-Quality Holzbausatz, lasergeschnitten|
|Wingpan approx. [mm]||1780|
|Length approxx. [mm]||1100|
|Wing area approx. [dm²]||30|
|Take-off weight, approx. [g]||550|
|Wing loading approxx. [g/dm²]||19.5|
|RC functions||Seite, Höhe, Spoiler|
|Rumpf||Highest-Quality Holzbausatz, lasergeschnitten|
|Tragfläche||Highest-Quality Holzbausatz, lasergeschnitten|
|Sonstiges||mehrfarbiger Bauplan, Bauanleitung mit vielen Farbfotos, numerierte Bauteile, Bespann-Anleitung|
Kein Vergleich zu den kits von vor zwanzig Jahren.
Dann bauen wir mal den Vogel zusammen, Teil 2 kommt dann.