- Description
Servo KST, X20-3012 V2, brushless servo for giant scale models
40.5x20x38mm, 350Ncm/8.4V
The brushless servos of the X20-serie are the high-end servos of KST.
In order to guarantee the maximum operating reliability, particularly high quality brushless motors are used in these servos.
The KST brushless HV X20-3012 servo has a torque of 300N/cm and a positioning speed of 0,12s/60° at 7.4 Volt. This servo is perfect for giant scale and jet models, where power, positioning speed and an accuracy of setting back to initial position are absolutely required.
Please pay attention to the servo specifications of the manufacturer of your model, when you choose your servo.
Further information you find in the corresponding tabs above this description.
technical data | |
Voltage range [V] | 6.0...8.4 |
Torque @ 6.0V [Ncm] | 380 |
Torque @ 7.4V [Ncm] | 420 |
Torque @ 8.2V [Ncm] | 450 |
Transit speed @ 6.0V [s] | 0.20/60° |
Transit speed @ 7.4V [s] | 0.17/60° |
Transit speed @ 8.2V [s] | 0.15/60° |
Tooth | 25T-6 |
Gear type | Metallgetriebe |
Bearing | 2 Kugellager |
Motor | brushless |
Length (by manufacturer) [mm] | 40.5 |
Width (by manufacturer) [mm] | 21 |
Height (by manufacturer) [mm] | 40.2 |
Weight [g] | 78 |