KST MS 2208 HV, swash plate servo for 700-800-class helicopters
The KST MS2208 is a high performance swash plate servo for the 3D helicopter aerobatics. Due to the aluminium housing and the solid metal gear it is absolutely solid. Small milled cooling fins help to eliminate the heat, when the servo is extremely loaded.
The KST MS2208 is equipped with a high quality brushless motor, with is perfect for permanent load, as it might happen during an extreme 3D-flight.
Due to its extremely high positioning speed in connection with an excellent torque, the KST MS2208 is perfect for the 3D aerobatics.
Compared with the previous servos of the KST X20-serie, the KST MS-serie has less wear and a better setting back to initial position because of the new "magnetic sensor".
The KST MS2208 is a high-end swash plate servo and it is developed for very demanding 3D-helicopter pilots, for whom the best is just good enough.
It is perfect for 700-class helicopter.
Further information you find in the corresponding tabs above this description.
|Voltage range [V]||6.0 - 8.4|
|Torque @ 6.0V [Ncm]||180|
|Torque @ 7.4V [Ncm]||220|
|Torque @ 8.2V [Ncm]||250|
|Transit speed @ 6.0V [s]||0.09/60°|
|Transit speed @ 7.4V [s]||0.08/60°|
|Transit speed @ 8.2V [s]||0.07/60°|
|Length (by manufacturer) [mm]||40.5|
|Width (by manufacturer) [mm]||20|
|Height (by manufacturer) [mm]||38|