Zero A6M Mitsubishi, wingspan 1400mm, PNP

Item no.:  DPFMS033PGRN EAN: 4251014774340
Zero A6M Mitsubishi, wingspan 1400mm, PNP, D-Power # FMS033PGRN - Image 1
Zero A6M Mitsubishi, wingspan 1400mm, PNP, D-Power # FMS033PGRN - Image 2
Zero A6M Mitsubishi, wingspan 1400mm, PNP, D-Power # FMS033PGRN - Image 3
Zero A6M Mitsubishi, wingspan 1400mm, PNP, D-Power # FMS033PGRN - Image 1Zero A6M Mitsubishi, wingspan 1400mm, PNP, D-Power # FMS033PGRN - Image 2Zero A6M Mitsubishi, wingspan 1400mm, PNP, D-Power # FMS033PGRN - Image 3
489,00
incl. VAT and excl. shipping
Total amount: {{ totalPrice }}
At the moment not possible to buy!
This item notice Article is noted
Compare this article To the product comparison
Availability: (Delivery time: )
  • Description

Zero A6M Mitsubishi, wingspan 1400mm, PNP
D-Power # FMS033GRN

 

The A6M Zero was a long-range fighter aircraft operated by the Imperial Japanese Air Service. In early combat operations, the Zero gained a legendary reputation as a 'dogfighter' remaining king of the air until around 1943.
The Zero A6M from FMS is a cleverly constructed and extremely agile Scale Warbird. It has a wingspan of 1400mm.

Powerful drive:
The combination of the powerful brushless drive, the 70A brushless controller and a 4S battery (sold separately) will not only catapult the model, but also your adrenaline in lofty heights.

Pre-installed electronics:
This model airplane is made of EPO hard foam and is delivered with pre-installed electronics and ready to fly.
Motor, controller, servos for ailerons, rudder and elevator, landing flaps and the retractable gear are already installed.
You only need a suitable battery and a remote control system.

Solid construction:
Due to the solid EPO hard foam construction the Zero A6M forgives some hard landings. If foam parts are damaged, they can be quickly and durably  repaired with superglue.
For the construction of the model plane there is no glue needed. Electronics and undercarriage are already pre-installed, you only have to screw the wings and tail unit.

Features:

  • PNP-model made of solid EPO hard foam
  • Powerful brushless outrunner, high performance controller and servos already pre-installed
  • Ready to fly after just a few steps
  • Lots of Scale details
  • Already painted
  • Solid electronical retractable gear
  • Functional landing flaps
  • Includes 3-blade propeller 13x9“ 
  • Illustrated construction manual is included

Content:

  • Finished model made of EPO
  • Motor: Brushless 4250-KV540
  • Controller: Brushless 70A with 5A BEC
  • Servos: 2x 9g digital MG, 3x 9g analog and 1x 17g digital MG

Required accessories:

  • Remote control: at least 6 channels
  • Receiver: at least 6 channels
  • Battery: 4S LiPo 2600mAh 25C
  • Charger D-Power Premium 200

Further information you find in the corresponding tab pages above this description 

Technical data
Manufacturer/Importer FMS/D-Power
Type of construction Fertigmodell aus EPO
Wingspan approx. [mm] 1400
Length approx. [mm] 1085
Wing area approx. [dm²] 30.1
Take-off weight approx. [g] 1880
Wing loading approx. [g/dm²] 62.4
RC functions Seite, Höhe, Quer, Motorregelung, Landeklappen, Einziehfahrwerk
Average customer rating: 
Number of Customer reviews: 0
Write an online review of this item and show it to other visitors!