- Description
- Videos
Zepsus DUAL magnetic switch, without voltage controller
20A constant/50A peak
This is a very small power switch designed for large scale gliders. With this switch your RC model can be turned on or off without the need to access it internally. Just move a magnet over the switch, on the outside of the fuselage of your model, and it turns on. To turn it off just pass the magnet by the switch again.
The dual battery in combination with the magnetic switch provides redundant functionality, which again provides security. The switch selects the battery or BEC with the highest voltage. If the voltage is the same, the power is drawn from both, batteries or BECs. If one battery or BEC is removed or has a short-circuit, it will not affect the other battey or the output voltage.
The magnetic switch has an ultra low power consumption in off-state ( ~ 30µA). The consumption is so low that the switch can be connected to a 1000mAh battery for a protracted period without discharging it.
The switch has a built-in failsafe function: It remembers its state for at least 10 sec, if it is disconnected from the battery. This protects the switch against power glitch caused by, for example, bad battery connection etc.
Technical data:
-
Input voltage range: 3,0 - 13V
-
Output current constant: 20A, peak: 50A
-
Standby current: 30µA
-
Connection cable: silicone cable with 1,5mm²
-
Weight including cable: 18g
-
Length including cable: 315mm
-
Dimensions: 28 x 14 x 6mm
All switches have been tested by the manufacturer with 20A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is performed.
